Sold out

All orders ship next working day

Here's some of the bikes, frames and parts we have on sale right now, all priced to sell quickly so don't expect these to hang around.

Vendetta X2 LE - Large 275 - €999

The Vendetta X2 LE was our ground breaking hardtail and the forerunner to the Vendetta X3 - is the original titanium rowdy hardtail, originally designed and built some 14 years ago, long before the many Vendetta-a-like copies that you see today appeared. Whilst we have tweaked the geometry over the years the Vendettas core genetics have remained the same 'go fast' with maximum stability giving you the confidence to hammer the trail without any weight compromises.

This frame is brand new never use it comes with alloy seat clamp but no rear axle.
FEATURES DESCRIPTION

Material:

Tubing certified aerospace grade Ti-3AL-2.5V

Fork compatibility 275:

Frame designed for 140 - 150mm (using forks above this will invalidate the warranty)

Weight:

2.22kg

Bottom bracket:

BSA threaded

Head tube:

Straight 44: S.H.I.S. 44ZS - 44EC, external cup allows for tapered forks, with Kingdom head tube badge

Seat tube:

Seatpost diameter 31.6, seat clamp diameter 34.9 - alloy seat clamp included

Brake:

IS tabs

Drive:

1x12 or 1 x11 compatible

Rear dropout:

Spacing 148x12, dropout thread pitch 1.75 - axle not included

Mounts:

Two water bottle mount under down tube and on top of down tube

Routing internal:

External - All brake gear cables/hoses route externally under the top tube, dropper runs internally in down tube into seat tube

Max tyres:

Max 27.5 x 2.5*

Frame finish:

Semi Raw - Cleaned tubes but exposed welds



Vendetta 22 Medium 275 geometry

M

Effective top tube

640

Head angle

64.5

Seat angle

76.5

Wheelbase

1243

Chainstay length

415

Head tube length

128

Seat tube length

442

Axle to crown*

555

BB drop

33

Reach

431

Stack

640

All measurements in metric. *Geometry and axle to crown for 150mm HelmMk2 27.5 fork with straight head tube and extended headset lower cup.

Carbon Gravel Wheelset 700c - PRICE DROP €300

Powerway Gravel 700C Carbon wheelset

This is a brand new never used gravel wheelset. Hubs are Powerway CX27A hubs, 6 bolt hubs, laced with Pilar areo spokes to Speeder 700c carbon hookless rims. Rims are matte Toray T700 carbon NOT tubeless ready.

Note: We have not tested these rims they have only been used in a studio photoshoot so warranty on these rims is with the manufacturer Speeder Cycles and NOT Kingdom.

HUB SPEC
Rear Hub: Powerway CX27A, 142x12, 6 bolt (Shimano 11sp freehub), 28 Spoke
Front Hub: Powerway CX27A, 100x12, 6 bolt, 28 Spoke

WHEELSET WEIGHT
1700g

RIM SPEC
Hookless
Weave: UD / 3K / 12K                                                                  
Finish: Matt                                              
Spoke 32H                                              
Outer Width: 30mm
Inner Width: 24mm                                      
Depth: 35
Hookless Sidewall: 3mm

VOID 130 Trail - Medium 275 - SOLD

The VOID is our latest and most progressive full suspension titanium frame, A single pivot with either 130mm or 160mm travel. This VOID is about 8 months old and has been our demo and test VOID.

It's in excellent condition with no dents dings or scratches, it has new pivot hardware and bearings and comes with our standard original owner 2 year warranty.

€1899 Frame only no shock
FEATURES DESCRIPTION

Material:

Tubing certified aerospace grade Ti-3AL-2.5V, printed parts Grade 6/4

Fork compatibility 275:

Frame designed for 130mm - 140mm (using forks above this will invalidate the warranty)

Shock:

NOT INCLUDED - 210x50mm hardware 40x8 and 25x8

Bottom bracket:

T47 threaded

Head tube:

Straight 44: S.H.I.S. 44ZS - 44EC, external cup allows for tapered forks, with VOID engraved head tube

Seat tube:

Seatpost diameter 31.6, seat clamp diameter 34.9 - alloy seat clamp included

Brake:

IS tabs

Drive:

1x12 or 1 x11 compatible

Rear dropout:

Spacing 148x12, dropout thread pitch 1.75 - axle not included

Mounts:

Water bottle mount under down tube

Routing internal:

External - All brake gear cables/hoses route externally through main frame and then into chain stays

Max tyres:

Max 27.5 x 2.35*

Frame finish:

Raw - Cleaned tubes with raw welds

Weight:

2.22kg


VOID 130 Trail - Medium 275 geometry

M

Effective top tube

620

Head angle

65

Seat angle

76

Wheelbase

1228

Chainstay length

438

Head tube length

125

Seat tube length

415

Axle to crown*

535

BB drop

16

Reach

470

Stack

603

All measurements in metric and based on a 130mm Cane Creek Helm Mk2 boost 275 fork and both tyres at 2.4 width. *Axle to crown includes 10mm lower headset cup.

El Pugist 26 or 275 - SOLD

The El Pugilist is our very limited edition BB pivot, slopestyle, DJ, trail fun bike. Produced in a production run of just 10. This frame wa sour very own showroom frame and appeared in many photoshoots but was hardly ridden so it's condition is brand new.

It comes with a RockShox Deluxe Ultimate shock that is tuned to the suspension of this frame.

This Pugilist comes with a single speed and geared hanger and with Purple/Pink and Kash bronze shock arms.


The frame is in brand new condition with no dents dings or scratches, and it comes with our standard original owner 2 year warranty.

€1899 Frame and shock
FEATURES DESCRIPTION

Material:

Tubing certified aerospace grade Ti-3AL-2.5V, printed parts Grade 6/4

Fork compatibility 26 or 275:

Frame designed for 120mm -130mm (using forks above this will invalidate the warranty)

Shock:

INCLUDED - 190 x 45 Rockshox Deluxe Ultimate - Travel 118mm

Bottom bracket:

Integrated no BB required but oly accepts 30m spindle cranks

Head tube:

Straight 44: S.H.I.S. 44ZS - 44EC, external cup allows for tapered forks, with Kingdom head tube badge

Seat tube:

Seatpost diameter 31.6, seat clamp diameter 34.9 - alloy seat clamp included

Brake:

PM sliding dropouts

Drive:

SS, 1x12 or 1 x11 compatible

Rear dropout:

Spacing 148x12, dropout thread pitch 1.75 - axle not included

Mounts:

Water bottle mount under down tube

Routing internal:

External - All brake gear cables/hoses route externally through main frame and then seat stays

Max tyres:

Max 27.5 x 2.35* Max 26 x .35

Frame finish:

Raw - Cleaned tubes with raw welds

Weight:

3.6kg



El Pugilist 26/275 short geometry with 275 set up 130mm forks

M

Effective top tube

625

Head angle

65

Seat angle

77

Wheelbase

1195

Chainstay length

390 - 410

Head tube length

120

Seat tube length

365

Axle to crown*

535

BB drop

14

Reach

470

Stack

603

All measurements in metric and based on a 130mm Cane Creek Helm Mk2 boost 275 fork and both tyres at 2.35 width. *Axle to crown includes 10mm lower headset cup.
Geometry based on 27.5 set-up will vary with 26" set-up or 26x27.5 set-up

Vendetta 22 Medium 275 - SOLD

The Vendetta is the original titanium rowdy hardtail, originally designed and built some 14 years ago, long before the many Vendetta-a-like copies that you see today appeared. Whilst we have tweaked the geometry over the years the Vendettas core genetics have remained the same 'go fast' with maximum stability giving you the confidence to hammer the trail without any weight compromises.

This frame is brand new never used. It is designed with a low bottom bracket and we recommend using forks no lower than 150mm.
FEATURES DESCRIPTION

Material:

Tubing certified aerospace grade Ti-3AL-2.5V, printed parts Grade 6/4

Fork compatibility 275:

Frame designed for 150mm (using forks above this will invalidate the warranty)

Printed chainstay:

Maximum drive side BB cup insert 10mm to enable routing.

Bottom bracket:

T47 threaded

Head tube:

Straight 44: S.H.I.S. 44ZS - 44EC, external cup allows for tapered forks, with Kingdom head tube badge

Seat tube:

Seatpost diameter 31.6, seat clamp diameter 34.9 - alloy seat clamp included

Brake:

IS tabs

Drive:

1x12 or 1 x11 compatible

Rear dropout:

Spacing 148x12, dropout thread pitch 1.75 - axle not included

Mounts:

Two water bottle mount under down tube and on top of down tube

Routing internal:

External - All brake gear cables/hoses route externally under the top tube, dropper runs internally in down tube into seat tube

Max tyres:

Max 27.5 x 2.5*

Frame finish:

Polished - Shinny metal finish.

Weight:

2.22kg


Vendetta 22 Medium 275 geometry

M

Effective top tube

635

Head angle

63.5

Seat angle

73

Wheelbase

1187

Chainstay length

415

Head tube length

120

Seat tube length

440

Axle to crown*

555

BB drop

45

Reach

431

Stack

640

All measurements in metric. *Geometry and axle to crown for 150mm HelmMk2 27.5 fork with straight head tube and extended headset lower cup.

Vendetta 22 Large 29 - SOLD

The Vendetta is the original titanium rowdy hardtail, originally designed and built some 14 years ago, long before the many Vendetta-a-like copies that you see today appeared. Whilst we have tweaked the geometry over the years the Vendettas core genetics have remained the same 'go fast' with maximum stability giving you the confidence to hammer the trail without any weight compromises.

Another brand new high spec Vendetta 22 frame
FEATURES DESCRIPTION

Material:

Tubing certified aerospace grade Ti-3AL-2.5V, printed parts Grade 6/4

Fork compatibility 29:

The frame is designed for 140mm (using forks with mre travel will invalidate the warranty and effect the geometry)

Printed chainstay:

Printed chainstay yoke allows for full internal routing - Maximum drive side BB cup insert 10mm to enable routing.

Bottom bracket:

T47 threaded

Head tube:

Tapered: S.H.I:S. 44ZS - 56ZS with engraved 'VENDETTA'

Seat tube:

Seatpost diameter 31.6, seat clamp diameter 34.9

Brake:

CNC PM tabs.

Drive:

1x12 or 1 x11 compatible

Rear dropout:

Spacing 148x12, dropout thread pitch 1.75 - axle not included

Mounts:

Two water bottle mount under down tube and on top of down tube

Routing internal:

Full internal - All cables/hoses route internally from down tube, through T47 BB and exit via chainstays or connect to a dropper

Max tyres:

Max 29 x 2.5 tyre*

Frame finish:

Semi Raw - Halfway between raw and polished.

Weight:

2.35kg


Vendetta 22 Large 29 geometry

M

Effective top tube

640

Head angle

64

Seat angle

76

Wheelbase

1243

Chainstay length

432

Head tube length

120

Seat tube length

445

Axle to crown*

555

BB drop

55

Reach

487

Stack

657

All measurements in metric. *Geometry and axle to crown for 140mm HelmMk2 29 fork with tapered head tube.

Resist 22 Complete - SOLD

Resist 22 Complete BMX

Here's a real bargain a complete Resist 22" Ti BMX.

This bike was one of our first BMX prototypes and is now ready to find a new loving home. The frame in excellent condition no knocks or dents, there's few little scuffs and marks on the cranks and rims but nothing too bad (see pic). It's basically an amazing deal to get you on a 22" titnaium BMX.

Here's the build spec:

Frame: Resist 22" titanium - with full OG owners waranty
Forks:
A&M Pitchforks 22
Wheels: WTP Logic 22" wheels, S&M Mainline 22x2.4 front tyre and WTP Overbite 22X2.3 rear tyre.
Bits: Odessey: Pedals, Stem, Bars, Brake, Saddle, Seatpost and Headset.
Cranks: Fiend with 28T chainring

Top tube

21.9"

Head angle

74.5

Seat angle

71

Standover (sloping TT)

22.6"

Standover (Park TT)

25"

Chainstay length

14.2"

Head tube length

4.7"

Fork length

13.4"

BB drop

25mm

BB height (2.4 tyres)

11.30"


In purchasing from our site you are agreeing to our Terms and Conditions of sale shown here please read before purchasing.