Meet the Vendetta DJ. 26" wheeled dirt jumper/slopestyle. Customisable. Printed parts.

Sold out

Vendetta Description

Almost 15 years ago we made our first titanium Vendetta and of course it was a Dirt Jumper/4X bike. It had 26" wheels (as thats all there was back then) with a progressive geometry and it was first of a kind. Now we have come full circle and are offering our class beating trail hardtail the Vendetta 22 as a dedicated Dirt Jumper once more.

Vendetta Features

Mountain bikes have moved on since we made our first Vendetta DJ in 2007 and this latest version is now packed with the latest cutting edge tech, like an additive manufactured chainstay plate that allows for full internal gear and more tyre clearance. Brake (and gears if needed) routing through a future proof T47 bottom bracket, which also gives better rigidity and reduced flex in the bottom bracket area.

The last touch is our new Vendetta is the headtube which can be either engraved with Vendetta or with out 'classic' headtube badge. Take your pick.

We are offering the Vendetta DJ with a host of geometry and specification options on this page to dial in your ride. If however you can't find what you are looking for you can further customise this frame. You can learn more about our extended range of custom geo and spec, in the tabbed section below called 'Special Cusom Orders'.

The frame comes without a ear axle and an alloy seat clamp.



Tubing certified aerospace grade Ti-3AL-2.5V, printed parts Grade 6/4

Fork compatibility 26:

90mm - 120mm (using forks outside this range will invalidate the warranty)


Short or Long

Printed chainstay:

Printed chainstay yoke allows for full internal routing - Maximum drive side BB cup insert 12mm to enable routing.

Bottom bracket:

T47 threaded only

Head tube:

Straight 44: S.H.I.S. 44ZS - 44EC, external cup allows for tapered forks Tapered: S.H.I:S. 44ZS - 56ZS

Seat tube:

Seatpost diameter 31.6, seat clamp diameter 34.9


PM tabs on sliding dropouts


Single speed or geared

Rear dropout:

Spacing 148x12, dropout thread pitch 1.75 - Black Burgtec axle not included


Unless custom specified no mounts

Routing internal:

Single speed - brake fully internal via BB and chainstay no gears. Geared - brake and gears fully internal via BB into chainstays



Max tyres:

Max 26 x 2.35

Frame finish:

Semi Raw - Halfway between raw and polished. Polished - brushed metal finish.


Approx weight for a medium Vendetta 1.8 - 2kg** approx only and based on a medium frame, add +/- 200g per frame size

*Some brands 2.35 tyres may not fit due to massive inconsistency in sizing. **Weight: The frame weight listed is approximate only. It sounds obvious but some customers are still confused so we must state that this is a custom frame so we cannot give accurate frame weights as obviously every frame is different in some way.

Vendetta Geometry

Vendetta DJ 26"

The Vendetta DJ is 26" wheel only. Note this chart is a guide only as custom geometry will change wheelbase, stack, reach etc.

Short Long

Effective top tube



Head angle



Seat angle






Chainstay length



Head tube length



Seat tube length



Axle to crown*



BB drop**



BB width (T47)



Fork offset



All measurements in metric. *axle to crownbased on 110mm fork option. **BB is based on low BB drop option.


What do you get with your Vendetta?

Warranty - Every Vendetta has a limited lifetime full defect warranty to the original owner. This means as long as you're the original owner and you purchased the Vendetta, then in the unlikely event of a problem your Vendetta is fully covered against any manufacturers defects or faults.

You'll need to have registered the frame with us after purchase to get this warranty and it doesn't cover your frame for crash damage. In case of crash damage your Vendetta would be covered by our other crash repair warranty.

Terms apply to this warranty, like 'over forking' your Vendetta by running forks outside the recommended range or carelessly reversing your car over it by mistake.

If you are thinking of ordering a Vendetta we would advise you to click this link to learn more about Kingdom warranty and the procedure for claims.

Vendetta Sizing

Helping our planet breathe

Committed to helping reduce climate change.

Churning out bikes for profit has never been a goal (or a result, ask our families) of running Kingdom. For us, it’s all about experimentation and improvement and increasing the fun people have on bikes (ourselves, mainly, if we’re honest).

But we do produce stuff, all of it creating waste in one way or another; we are all-too-aware of the toll of consumerism on the precious environments in which we ride. We know a growing number of riders feel the same.

The crisis is this: Everything we make harms nature. Yet it seems impossible to just stop. Is there a better way forward?

We’ve thought long and hard, we’ve searched high and low, and our next goal, one we’ve already started, is to improve the way our bikes are made. To trial and utilise the best, new efficient techniques of manufacture like additive manufacturing to help reduce our wastage, limit our impact, and improve or entirely overhaul our range with new innovative parts and features.

On top of these goals Kingdom goals to reduce our manufacturing impact we have also decided that every Vendetta frame sold will mean 10 trees will be planted as part of the cost of your frame by including a donation to ONE TREE PLANTED.

You can find out more about ONE TREE PLANTED and the work they do by clicking this link.


Special Customisation Orders

How to order a bespoke Vendetta?

The custom Vendetta allows you to specify how you want your Vendetta, by using the option buttons to design and create your own Vendetta based on you and your riding.

We do offer specific bespoke fit customisation it is limited to the follow geometry;

BB drop (BBD)
Chainstay Length (CSL)
Effective Top Tube (ETT)
Head Tube Length (HTL)
Axle to Crown (A2C) - This is highly recommended so your frame retains the correct geometry

Also specifications such as water bottle or camera mounts etc.

Please email us, to confirm your special custom requests can be done before ordering. Once your special customisation is confirmed, and then after ordering we will send you a drawing of your Vendetta for approval and subsequent adjustments if needed. We allow 2 drawing versions to get your Vendetta how you want it, after this we charge a fee of €25 per extra version.


In purchasing from our site you are agreeing to our Terms and Conditions of sale shown here please read before purchasing.