Sold out
Due to over demand we are not taking more orders on the Vendetta 22 until July 1st 2022

Production leadtime 60-90 days from frame drawing approval

Due to over demand we are not taking more orders on the Vendetta 22 until July 1st 2022

Vendetta Description

The Vendetta is the original titanium rowdy hardtail, originally designed and built some 14 years ago, long before the many Vendetta-a-like copies that you see today appeared. Whilst we have tweaked the geometry over the years the Vendettas core genetics have remained the same 'go fast' with maximum stability giving you the confidence to hammer the trail without any weight compromises.

So if you want the original, most progressive and sexiest titanium hardtail on the market, you are in the right place.

Vendetta Features

The Vendetta is packed with new cutting edge specifications. Like the all new additive manufactured chainstay plate that allows for full internal gear and brake routing through a future proof T47 bottom bracket, which also gives better rigidity and reduced flex in the bottom bracket area.

Our new CNC rear PM brake tabs are a work of art and we have done away with the seat tube support tube and replaced it with a stylish and distinctive seat tube gusset. The last touch is our new Vendetta headtube which can be either engraved with Vendetta or with out 'classic' headtube badge. Take your pick.

All routing is available as fully internal with all cables running from down tube to its exit on the chainstays or as external routing for the dropper with C-clips running externally on the down tube.

FEATURES DESCRIPTION

Material:

Tubing certified aerospace grade Ti-3AL-2.5V, printed parts Grade 6/4

Fork compatibility 275:

130mm to 150mm (using forks outside this range will invalidate the warranty)

Fork compatibility 29:

120mm to 140mm (using forks outside this range will invalidate the warranty)

Printed chainstay:

Printed chainstay yoke allows for full internal routing - Maximum drive side BB cup insert 10mm to enable routing.

Bottom bracket:

T47 threaded only

Head tube:

Straight 44: S.H.I.S. 44ZS - 44EC, external cup allows for tapered forks Tapered: S.H.I:S. 44ZS - 56ZS

Seat tube:

Seatpost diameter 31.6, seat clamp diameter 34.9

Brake:

IS tabs or new CNC PM tabs.

Drive:

1x12 or 1 x11 compatible

Rear dropout:

Spacing 148x12, dropout thread pitch 1.75 - Black Burgtec axle not included

Mounts:

Two water bottle mount under down tube and on top of down tube

Routing:

Full internal - All cables/hoses route internally from down tube, through T47 BB and exit via chainstays or external dropper option on downtube.

Max tyres:

Max 29 x 2.5 tyre* Max 27.5 x 2.5*

Frame finish:

Semi Raw - Halfway between raw and polished. Polished - Glossy metal finish. Bead Blast - Matt grey finish

Weight:

Approx weight for a medium Vendetta 1.8 - 2kg** approx only and based on a medium frame, add +/- 200g per frame size

*Some brands 2.5 tyres may not fit due to massive inconsistency in sizing or due to volumen and shape. Sliding dropouts will offer more tyre size range. **Weight: The frame weight listed is approximate only. It sounds obvious but some customers are still confused so we must state that this is a custom frame so we cannot give accurate frame weights as obviously every frame is different in some way.

Vendetta Geometry

Vendetta 29

The Vendetta 29 frame is 29 or 27.5+ specific due to the BB drop and chainstay.

S M L XL

Effective top tube

595

620

640

665

Head angle

65

65

65

65

Seat angle

77

77

77

77

Wheelbase

1190

1215

1235

1260

Chainstay length

428

428

428

428

Head tube length

105

120

130

135

Seat tube length

370

415

450

510

Axle to crown*

555

555

555

555

BB drop

65

65

65

65

BB width (T47)

73

73

73

73

Fork offset

44

44

44

44

All measurements in metric. *Geometry and axle to crown for 140mm HelmMk2 29 fork with tapered head tube. Wheelbase and Reach are based on 76 Seat Angle and 65 Head Angle.

Vendetta 275

The 27.5 frame is not compatible with 29" wheels due to the 27.5 specific chainstay, for tyres 27.2 x 2.6" and above we suggest opting for the Vendetta 29.

S M L XL

Effective top tube

595

620

640

665

Head angle

64

64

64

64

Seat angle

76

76

76

76

Wheelbase

1180

1205

1225

1250

Chainstay length

412

412

412

412

Head tube length

105

120

125

135

Seat tube length

370

415

450

510

Axle to crown*

545

545

545

545

BB drop

35

35

35

35

BB width (T47)

73

73

73

73

Fork offset

44

44

44

44

All measurements in metric. *Geometry and axle to crown for 150mm HelmMk2 27.5 fork with tapered head tube. Wheelbase and Reach are based on 76 Seat Angle and 64 Head Angle.

Warranty and Parts

What do you get with your Vendetta?

Warranty - Every Vendetta has a limited lifetime full defect warranty to the original owner. This means as long as you're the original owner and you purchased the Vendetta, then in the unlikely event of a problem your Vendetta is fully covered against any manufacturers defects or faults.

You'll need to have registered the frame with us after purchase to get this warranty and it doesn't cover your frame for crash damage. In case of crash damage your Vendetta would be covered by our other crash repair warranty.

Terms apply to this warranty, like 'over forking' your Vendetta by running forks outside the recommended range or carelessly reversing your car over it by mistake.

If you are thinking of ordering a Vendetta we would advise you to click this link to learn more about Kingdom warranty and the procedure for claims.


Vendetta Sizing

Standover height is approximate heights may vary based on tyre size and volume

Vendetta 29

S M L XL

Reach

445

463

479

502

Stack

654

667

676

681

Based on 140mm Helm MkII 29er forks

Vendetta 275

S M L XL

Reach

445

463

481

502

Stack

610

623

628

637

Based on 150mm Helm MkII 275 forks

Helping our planet breathe

Committed to helping reduce climate change.

Churning out bikes for profit has never been a goal (or a result, ask our families) of running Kingdom. For us, it’s all about experimentation and improvement and increasing the fun people have on bikes (ourselves, mainly, if we’re honest).

But we do produce stuff, all of it creating waste in one way or another; we are all-too-aware of the toll of consumerism on the precious environments in which we ride. We know a growing number of riders feel the same.

The crisis is this: Everything we make harms nature. Yet it seems impossible to just stop. Is there a better way forward?

We’ve thought long and hard, we’ve searched high and low, and our next goal, one we’ve already started, is to improve the way our bikes are made. To trial and utilise the best, new efficient techniques of manufacture like additive manufacturing to help reduce our wastage, limit our impact, and improve or entirely overhaul our range with new innovative parts and features.

On top of these goals Kingdom goals to reduce our manufacturing impact we have also decided that every Vendetta frame sold will mean 10 trees will be planted as part of the cost of your frame by including a donation to ONE TREE PLANTED.

You can find out more about ONE TREE PLANTED and the work they do by clicking this link.

 

Special Customisation Orders

How to order a bespoke Vendetta?

The custom Vendetta allows you to specify how you want your Vendetta, by using the option buttons to design and create your own Vendetta based on you and your riding.

We do offer specific bespoke fit customisation it is limited to the follow geometry;

BB drop (BBD)
Chainstay Length (CSL)
Effective Top Tube (ETT)
Seat Tube Length (STL)
Head Tube Length (HTL)
Axle to Crown (A2C) - This is highly recommended so your frame retains the correct geometry

Also specifications such as water bottle or camera mounts etc.

Please email us, to confirm your special custom requests can be done before ordering. Once your special customisation is confirmed, and then after ordering we will send you a drawing of your Vendetta for approval and subsequent adjustments if needed. We allow 2 drawing versions to get your Vendetta how you want it, after this we charge a fee of €25 per extra version.

 

In purchasing from our site you are agreeing to our Terms and Conditions of sale shown here please read before purchasing.